djkindt Posted February 14, 2007 Share Posted February 14, 2007 Does anybody have a repair manual with this torque setting listed? '85 DL 1.8L 5sp. Crank pulley bolt. in the rain!! Yippie... thanks Quote Link to comment Share on other sites More sharing options...
Prospeeder Posted February 15, 2007 Share Posted February 15, 2007 i belive its around 80-90 ft lbs, but I just took a 4 foot pipe on a 1/2 in ratchet and tightend it up real good, worked out well, its still tight and on there Quote Link to comment Share on other sites More sharing options...
daeron Posted February 15, 2007 Share Posted February 15, 2007 EA 82 crankshaft pulley torque is listed in FSM as 66-79 ft-lbs. this is the OHC engine, right? Quote Link to comment Share on other sites More sharing options...
Snowman Posted February 15, 2007 Share Posted February 15, 2007 I always do them at 75, which I know is within the specs given by all the manuals. Quote Link to comment Share on other sites More sharing options...
zyewdall Posted February 15, 2007 Share Posted February 15, 2007 As tight as you can get it -- because it really sucks when it comes off when you are driving... It's a steel bolt in a steel crankshaft, so it'd be pretty hard to strip out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.