crauch Posted June 21, 2007 Share Posted June 21, 2007 It makes a crazy niose when I make a sweeping turn? what does the rear wheel bering look like? Link to comment Share on other sites More sharing options...
Skip Posted June 21, 2007 Share Posted June 21, 2007 "what does the rear wheel bering look like?" Your year Forester had an issue with the rear wheel bearings. The fix was to replace them with Legacy wheel bearings. The Impreza (same platform) also suffered this malady. Does the noise come from the rear, middle or the front of the vehicle? > front = CV joint > middle = torque bind > rear = wheel bearing Hope this helps? Link to comment Share on other sites More sharing options...
sgregory Posted June 24, 2007 Share Posted June 24, 2007 My 93 Impreza rear wheel bearings going out, when you say swap out with Legacy wheel bearings, are you meaning just putting Legacy bearings in or is there more to swap out to make this change? Link to comment Share on other sites More sharing options...
Skip Posted June 24, 2007 Share Posted June 24, 2007 sorry sg I can not answer your question this applies to late 90's Imp/Foresters Link to comment Share on other sites More sharing options...
sgregory Posted June 24, 2007 Share Posted June 24, 2007 OK, just thought it might be similar to Impreza's, will probably just replace with Imreza bearings. Thanks for the reply. Link to comment Share on other sites More sharing options...
idosubaru Posted June 24, 2007 Share Posted June 24, 2007 93's differ in some respects to later model EJ drivetrain parts, all are not interchangeable. i'm not saying the bearings won't work, but don't assume this info applies to your year. the parts suppliers *should* have adequate info on that by now though? if i needed rear bearings on an impreza i'd swap in an entire hub assembly and do a rear disc brake swap at the same time. i don't even need wheel bearings for an excuse, i'm converting my brakes now! Link to comment Share on other sites More sharing options...
sgregory Posted June 24, 2007 Share Posted June 24, 2007 Good advice, I will have to look into what rear ends are compatable with the 93 Impreza. Link to comment Share on other sites More sharing options...
hohieu Posted June 25, 2007 Share Posted June 25, 2007 "what does the rear wheel bering look like?"Does the noise come from the rear, middle or the front of the vehicle? > front = CV joint > middle = torque bind > rear = wheel bearing Hope this helps? Is it possible that a front wheel bearing would also cause noise in the front? I just replaced a loud rear wheel bearing on my 99 forester as well. Now that the rear is quiet again, I notice what I believe to be noise caused by a failing front left wheel bearing. It's the same wump, wump at slower speeds and a roar at highway speeds (not necessarily when making "sweeping turns"). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now