Jump to content
Ultimate Subaru Message Board

Recommended Posts

Fixed. Just had to remove the bottom sill trim, loosen the two bolts and give it a wack with the board and hammer. I moved it back about 3/16" and it no longer rattles. Solid as can be.

 

There is a little adjustment in just the latch plate, but I needed more.

 

Anyone have the cure for the Rear hatch rattle on a 98 Impreza. There does not seem to be much adjustment in the hook and none in the latch. The bumpers are in good condition as is the seal.

 

Am I missing an adjustment point, Thanks, Larry

Link to comment
Share on other sites

I think the nut plate inside must be sealed or held in place with some adhesive. I tried to push it back a few weeks ago. I could only move the plate a 1/16" or so. It took a wood block and a good wack to get it to move (bolts loose while moving it).

Link to comment
Share on other sites

  • 8 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...