Hi All;

 

Had engine out to repair valve damage from broken timing belt and think I may have wired injectors wrong. How can you tell if they are wired correctly?

 

thanks in advance;

 

Wayneb

There should be white tape around one from each side, I believe those go towards the front of the car. The other two will have a black marking on them.

The identifying tape is normally around the harness right at each injector connector; it's white on the front cylinders (#1 and #2), and black at the rears (#3 and #4).

Thanks Guys!

 

Had them reversed on both sides!

 

Explains a lot about how it's running!

 

Thanks again;

 

Wayneb