91LegLS Posted February 18, 2008 Share Posted February 18, 2008 Changing the bulbs on the "cruise" and seat heater switch, can the bulb be replaced the same as my '91 Leg or did Subaru decide to change the switches so that it makes it easier for them to sell switches when the bulbs burn out? How do I also remove the plastic wood surrounding the stereo and HVAC controls? Quote Link to comment Share on other sites More sharing options...
EVOthis Posted February 18, 2008 Share Posted February 18, 2008 check down at the bottom of this post.....there is a list of related posts....im pretty sure i read something about this not to long ago..... Quote Link to comment Share on other sites More sharing options...
91LegLS Posted February 18, 2008 Author Share Posted February 18, 2008 check down at the bottom of this post.....there is a list of related posts....im pretty sure i read something about this not to long ago..... Thanks for the info; after reading the threads, they mentioned how to remove the switches but not if the bulbs can be changed without replacing the switch. I didn't see any threads to remove the center dash plastic wood. Any ideas? Quote Link to comment Share on other sites More sharing options...
EVOthis Posted February 18, 2008 Share Posted February 18, 2008 not to sure man...havent had to deal with that yet.....im sure others will chime in...... Quote Link to comment Share on other sites More sharing options...
EvilDead Posted February 18, 2008 Share Posted February 18, 2008 Thanks for the info; after reading the threads, they mentioned how to remove the switches but not if the bulbs can be changed without replacing the switch. I didn't see any threads to remove the center dash plastic wood. Any ideas? Nothing in the owner's manual? Pick up a Chilton manual, and go from there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.