August 31, 200817 yr Author looky here im sure those aren't cheep $$$ thats not the hard part with the swap its still getting XT6 hubs and they are getting rare still working on new rings just need some time on the Laser , its busy at work .
August 31, 200817 yr looky here that looks like a lot of work just to avoid 10 mins with a welder... -=Suberdave=- http://www.suberdave.com
September 17, 200817 yr Author sorry about the wait but i now have the proper spacing ring for the smaller backing plate ill still go with the 10$ + shipping for any one who wanted them thanks .
September 19, 200817 yr hey man, i could definatly stand to have a set of these. is it $10 for the pair of rings? either way, hit me up, i want to send you some money so i can get my brat suspension done. send me a pm with your payment info. ill get you some $$. peace tim
May 21, 200916 yr Author Bump up this old thread. Any new updates? i have the rings for the brembo swap but after several smaller hub rings i have determined its not worth having a ring for the smaller hole backing plates ( wrx, leg.,) STI use a bigger berring hub so the hole in the backing plate needs to have a ring so the holes are drilled half in the ring and half on the backing plate , just re drill the 3 holes in the backing plate as needed its not overly important that its exact as long as you are with in the 1/8th that the ring would center it .
January 24, 20215 yr Hoping these are something that is still available...I will be wanting to do this to my car
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now