Right here is a coolant hose that bend and goes towards the back. I bet its about 4" long. What would this hose be called so I called help the fine folks at NAPA?

 

Sorry, couldn't find my Napa receipt... it is like the, "Water pump/by-pass heater hose" sucks to get too... have fun.

Usually runs a bit long, (generic fit) cut to fit kind of thing. Meassure twice... cut once.

Edited December 21, 200817 yr by Indrid cold

Meassure twice... cut once.

 

That takes the fun out of it! Doesnt look too bad to get at. Clamp on the on the inside is lined up just right. That helps.

I think I remember it being real easy to get to if you take the alternator out. You could just buy a bulk of hose and cut it to fit.

just ask your local auto parts store if you can go back and look at their molded hoses and buy any of them that is the right diamiter cut it to fit... thats what i do

A Gates 28466 hose is what you want, trim to fit.

A Gates 28466 hose is what you want, trim to fit.

 

Thank you!

Your Welcome.

 

Works for either EA-81 or EA-82 engines.