foresterxtguy Posted November 20, 2012 Share Posted November 20, 2012 So my brats gas tank has a hole in it. Its not a big hole but big enough for gas to leak out. I'm tring to figure out my options. 1. Do I try and fix it? Which I have no idea how to. 2. Do I spend an arm and a leg to get one from a yard out west? I'm in PA 3. Get a fuel cell and mount it in the bed? Not sure if it will pass inspection. Unless some one has a spare on the forum.... The tank is already out of the car just need some advice. Thanks in advance Quote Link to comment Share on other sites More sharing options...
bonvo Posted November 21, 2012 Share Posted November 21, 2012 get some tank sealing apoxy should be able to get it at a parts house my dad sealed the tank on his 66 mustang using this and a bottle cap when it sprung a leak while out camping to this day 30 years later that bottle cap is STILL there and it hasnt leaked since Quote Link to comment Share on other sites More sharing options...
turbosubarubrat Posted November 21, 2012 Share Posted November 21, 2012 there is a few options to fixing it you can cut the rust out and weld anther piece on and it should be fine, you dont even need a welder for this (if you dont have one) get epoxy and put it on the piece of metal and it will last a long time but you want to make sure theres a good seal on it so you dont loose gas, i have even heard of people using bondo for fixing gas tanks. if you use a fuel cell just make brackets for it to be able to fit where the factory one was and i would have a aluminum one so you dont have to worry about rust Quote Link to comment Share on other sites More sharing options...
talldude Posted November 21, 2012 Share Posted November 21, 2012 Either weld a patch on yourself or have a welder do it, and be done with it. Take proper precautions so as not to level your neighborhood if you do weld it. Quote Link to comment Share on other sites More sharing options...
Brat78 Posted November 27, 2012 Share Posted November 27, 2012 I just bought one for my 78 brat from a yard in washington state and it was only $120 shipped to georgia. Search car-parts.com That's where I found mine. Quote Link to comment Share on other sites More sharing options...
moosens Posted November 27, 2012 Share Posted November 27, 2012 Anyone near I-5 Auto in Chehalis WA ?? Shows a tank for $35. Just spoke to them and they will NOT ship a tank. If someone wants to grab this and ship it to me I'd pay well. Thanks Quote Link to comment Share on other sites More sharing options...
moosens Posted November 27, 2012 Share Posted November 27, 2012 This is to my zipcode but results are there to review. http://car-part.com/cgi-bin/search.cgi Year Part ModelDescriptionPart GradeStock#US PriceDealer InfoDist mile1978 Fuel Tank Subaru Brat2A0038$CallAllied Auto Parts, Ltd. Can-MB(Winnipeg) Request_Quote 1-888-233-3332 Request_Insurance_Quote </B>13031979 Fuel Tank Subaru BratPUTS9779$75Browning Auto Parts - KOLT USA-TX(Austin) Request_Quote 1-800-338-5191 Request_Insurance_Quote </B>15621980 Fuel Tank Subaru BratABRAT$CallLon's Automotive USA-CO(Bayfield) Request_Quote 1-800-452-4542 Request_Insurance_Quote </B>18461979 Fuel Tank SubaruCARB,1.6LP6827$CallCBASS USA-ID(Payette) E-mail 1-800-331-963021961978 Fuel Tank Subaru2BC,AT,03-320$CallAll Hours Auto USA-ID(Nampa) E-mail 800-223-7794 / 208-466-984821991980 Fuel Tank Subaru Brat4 CYL,AWDA14427$50Randy's Auto Parts and Towing USA-WA(Okanogan) E-mail 1-800-553-446622991980 Fuel Tank Subaru Brat1.6,4X414371$35I-5 Auto & Truck Parts USA-WA(Chehalis) Request_Quote 800-551-4489 / 360-262-3550 Request_Insurance_Quote24671979 Fuel Tank Subaru BratCC48$100World Auto Parts USA-CA(Glendale) Request_Quote 888-782-8781 Request_Insurance_Quote </B>24861979 Fuel Tank Subaru Brat-USED940653$CallTri County Auto Dismantlers USA-CA(Santa-Paula) Request_Quote 1-877-667-2787 Request_Insurance_Quote </B>25231979 Fuel Tank SubaruSTOCK NO. #6502#6502$100Action Auto Parts & Glass (Alaska) USA-AK(Fairbanks) E-mail 1-907-456-181832551979 Fuel Tank SubaruSTOCK NO. #6510#6510$100Action Auto Parts & Glass (Alaska) USA-AK(Fairbanks) E-mail 1-907-456-18183255Year Part ModelDescriptionPart GradeStock#US PriceDealer InfoDist mile Quote Link to comment Share on other sites More sharing options...
Giant Posted November 28, 2012 Share Posted November 28, 2012 If the hole isn't too big, JB Weld works pretty good. Just make sure you clean it down to bare metal first. If the hole is big enough to need a patch, fiberglass with a POR 15 coating inside the tank will work great. Good luck finding anyone who will weld on a gas tank. Both methods are really just buying you time, so be on the lookout for a new tank. The JB Weld lasted quite a few year on my El Camino though. Quote Link to comment Share on other sites More sharing options...
Brat78 Posted November 28, 2012 Share Posted November 28, 2012 You can weld on a fuel tank safely if you fill it with water. Quote Link to comment Share on other sites More sharing options...
88wacaroo Posted December 2, 2012 Share Posted December 2, 2012 You can weld on a fuel tank safely if you fill it with water. The inside coating crap just starts to flake off over time and starts plugging stuff-IE-carb, fuel filters,pump,I"ve seen my buddies do it on motorcycles-last about a year or so then issues!! I"d weld it-nothin but a thing!! Gen 1 wgn. here I don"t rememb.if it was 2 or 4x I"m going up there now.. Super clean car-windshield,frt.end,dash-all gone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.