Welcome to Ultimate Subaru Message Board, my lurker friend!
|Welcome to Ultimate Subaru Message Board, an unparalleled Subaru community full of the greatest Subaru gurus and modders on the planet! We offer technical information and discussion about all things Subaru, the best and most popular all wheel drive vehicles ever created.
We offer all this information for free to everyone, even lurkers like you! All we ask in return is that you sign up and give back some of what you get out - without our awesome registered users none of this would be possible! Plus, you get way more great stuff as a member! Lurk to lose, participate to WIN*!
* The joy of participation and being generally awesome constitutes winning
** Not an actual guarantee, but seriously, you probably won't regret it!
Serving the Subaru Community since May 18th, 1998!
Subaru Dis from an EJ engine....on the EA82
Posted 02 March 2004 - 09:13 PM
Lets start this new performance discussion shall we?
How hard will it be? Will i have to rewire the whole car? will the stock EJ22 DIS system just bolt on and work? How do I install such and thing and make it talk to the stock ECU, and for them to work with each other and not conflict at 80 mph and just quit?
Blah blah blah....more Q's...
Posted 02 March 2004 - 10:03 PM
DIS is great but it requires a cam and a crank sensor usually. not shure what the signal differance is but that would be a issue. you would need the ej22 ECM and a custom cam sensor mabey a crank sensor too. this also puts you in a predicament with fuel control. an aftermarket ecm would be your best bet.
to sum it up its not feasable with out lots of enginering, machining, cashola$$$. not worth the benifits.
Posted 03 March 2004 - 10:15 AM
it is cheaper than most of the otehr dis systems and you get most of the stuff rom a junkyard
its where i got most of the stuff for otehr people who needed the parts
hit me a email if you need help
by the way are you handy with a soldering iron?
Posted 03 March 2004 - 02:25 PM
we pulled it off and hooked up a good stock system.
if you find a system make sure about timing control that was the big killer we had run into. it also was a carbed car so fuel control was not a issue. you need to consider that too. by all means go for it. have fun.
Posted 03 March 2004 - 04:47 PM
the ej systems, at least theones i know about, dont have any adjustment of the timing. look into the isuzu impulse rs, it used the gm map and the coil pack, along with a cas, and it made 160 hp out of a 1.6, on 5-6 lbs. reel good computer, that can adjust to injectors or anything, up to around 16 lbs.
but, it all seems kinda useless, you might as well just stick the whole ej22 in there, there is nothing that will bolt up, at all.
Posted 03 March 2004 - 08:02 PM
Posted 03 March 2004 - 08:48 PM
check out SDSefi they can get you a complete fuel and spark control system with DIS.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users