lmdew Posted February 12, 2018 Share Posted February 12, 2018 I've done a few Auto Trans removals and Installs. The Negative Ground bracket makes a great plate to keep the Trans TC fully seated. During removal: - Remove the Negative Ground Lead - When you have the trans moved back a 1/2" or so take the ground bracket and bolt it to the passenger side upper Trans/Engine Mount. You can use the bolt that was there and one of the nuts from the lower studs - The Ground Bracket 2" long or so will hold the TC in the trans Install in reverse order 2 Quote Link to comment Share on other sites More sharing options...
CNY_Dave Posted February 12, 2018 Share Posted February 12, 2018 A great tip. I bent up a little piece of metal to look like the factory tool, bolts to one of the starter bolt holes. It took a weight off my mind, I can tell you. Quote Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted February 12, 2018 Share Posted February 12, 2018 I've never done this but I think I saw someone who used a combination wrench - they bolted through the socket end. yeah - dunno if that would even work for our cars; Quote Link to comment Share on other sites More sharing options...
CNY_Dave Posted February 13, 2018 Share Posted February 13, 2018 Seated: Seated: 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.