Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 01/25/25 in Posts

  1. I would think so. Find the air leaks first then back that idle screw out appropriately. Good luck
  2. Probably lots of old vacuum hoses and even a small leak can make your idle rough. "To detect vacuum leaks in a carb car, the most common method is to use a carb cleaner or a similar spray around suspected leak areas while the engine is running; if the engine RPM changes noticeably when the spray is applied, it indicates a vacuum leak at that point."
  3. No, but you might feel it slightly sometimes when reversing. I believe there’s something in the device that uses gravity to activate the hill holder. If facing down hill it won’t hold the brakes on - and it seems to only act on one part of the system. EG: brakes the front left and rear right or vice versa. Pretty sure it’s the FL and RR circuit that’s used. Cheers Bennie

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.