subaruguru

seems to hickup a little bit when reved quick i think it might be the exhaust its got a y pipe back to just past the cat then nothing its getting new exhaust in a few days i was just wondering thanks Rob. engine is a 2.2 legacy duel port 1990

enkies are long gone pleas stick to the thread topic thanks Rob

pics ok so car is driving so i will get more pics soon comentz my ej swap goodness

my coupe has 4 miles on it

yeah i figured it was JDM thats coolkeep the info coming guys thanks

im not shure it was in a subaru legacy ls station wagon its not factory the vin plate says it should be a 2.2

ok so i came across an ej2.0 notices it said EJ20 when was pulling from a wrecked legacy so i put it in my legacy it runs good leaks oil from tyhe vlave covers but overall is a great engine so im thinking of using it in my coupe in place of the 2.2 aside from the CCs are there any prose to have the 2.0 over the 2.2 let me know thanks guys

was gonna be a suprize but yes the car is gonna be ultra flat

ok so the internet stoped working before i got the pic up here are my wheels

sorry about the sound i hadnt gotten the exhaust on it yet here are my wheels i know they are ea81 style but they fit over my calipers and i like the curve.

true but my first time i pulled a suby engine i removed the disty along with the starter was easyer for me to get my big hands down to the lower bell housing bolts. Rob.

if the trans is a 3.9 the axles will work from your car so you can use it in ur car the 3.7 wont work it has 25 spline you have 23 spline you will need a 5 speed conversion kit from bratsrus1 and i would use the rear diff aswell so you know you have the same ratio in the front and rear. as for the power steering it can be used but you will need to make your own brake and its really not worth it. same with the AC anyhting els on the motor is usless to you the turbo ea82 is dule port intake so it wont bolt to ur engine and its MPFI so not really any fuel parts will work.

ok so after the last few days i was about ready to throw in the towel on my 89 coupe but with some help from subardave,numbchux,bratsrus1 and shawnW it now RUNS !!!! the coil was nolt getting any power fixed that and with a bump of the starter my 89 coupe has EJ power :banana: here is a short clip more to come when its driving. thanks again to Subardave,bratsrus1,shawnW and numbchux Rob.

hey so i have my engine in 1990 legacy 2.2 its in a 1989 coupe and my harness is a direct copy of one bratsrus1 has that was made by ShawnW. i have my harness hooked up and i can crank my engine it gets fuel and the injectors ar clicking (also tested with a light) but im not getting any spark i tested all 3 wires going to the coil and none have any juice not with the key on or cranking. i replaced the coil pack the crank angle senser and the igniter and still nothing the ECU threw a mad AFM code but i replaced that and now ther are no codes so if anyone who has done the 2.2 conversion coulde give me some help it would be AWSOME to get this puppy running thanks again Rob.

yeah not really my style sold them.

sweet russ keep it up i got my tranny and engine in working on getting in running

SHOW show SHOW show SHOW show SHOW im bustin my duff on a car for the show and shine i really hope they have a show i might acutaly win something haha. Rob

ahh nice to see another coupe owner there arnt many in good condition im very lucky to have found this one.

it was a great day with great food and good stories well need to do it agian sometime. Rob.

ok so new pics isnt it perdy :slobber: it looks like its ment to be but now i have a problem im not getting spark im gonna try a different ignition modual but for now anyone have any ideas i have fule and compression let me know your ideas thanks bunches Rob

i would like a sticker just pm me with the details thnks Rob

ok so here is what i have done now that its warm out pulled the dash out swapped the auto speedo cable for the 5 speed one also disassembled the guages and removed the letters PRND21 much cleaner looking and i like the guage setup. I got the bumper mocked up fog lights wired in with the high beams. cleaned the engine bay removed the wiring for the prnd21 lights and located the hot for the revers lights for the trans. im buying my 2.2 on friday and im gonna put in in and get it running

damn ill see if i can fix that. hows this http://maps.google.com/maps?f=d&source=s_d&saddr=2205+s+18th+union+gap+Washington+98901&daddr=ogden+ut.+to:englewood+co.+to:mountain+home+ar.+to:new+mexico+to:san+diego+ca.+to:long+beach+ca.+to:los+angeles+ca.+to:san+francisco+ca.+to:weed+ca.+to:yakima+wa.&geocode=&hl=en&mra=ls&sll=38.913808,-107.426535&sspn=31.912947,55.458984&ie=UTF8&ll=39.639538,-107.402344&spn=31.590708,55.458984&z=4

ok so here is the basic route there will be changes to it due to roads and people we stop and see but i will keep you posted. http://maps.google.com/maps?hl=en&tab=wl peace Rob.

thanks for the kind words rob. The car is now in the FS section Rob hey mods i just relized this is old gen and the leg is a new jen