bobaru

I did the thing stripped that same bolt my fix high temp silicone on water pump gasket both sides, let form (set up) plumber tape TWO wraps on bolt rolled tight use finger nail to get in the treads best you can. Step 2 lock tight red tighten hand tight (snug) 3000 miles plus no problems.

Bondo DOES NOT stick to paint. ONLY bare metal.

Thats funny I got a feb 96 OBW 2.2 single port.

But aren't 90 though 94 2.2 dual port heads..........95 and up 2.2 single port heads

measure flexplate to motor flange.= X........ that is were TC needs to be. measure TC to trany flange ==== about 1/8 to 1/4 inch difference deeper in the trany. Bolt up motor & trany spin TC to flexplate, TC bolts will do the rest. that should help

Yes, It is adjustable.

Guess what, i think you found the meaning of hillholder.

I say check the PVC system and run a non multigrade oil....... start with 30 and go up to the next ...........then again I had no oil drops on the ground but the rear main and the PVC chamber (oil seperator plate ) were leaking .

june 1995 that makes your car a 95 not a 96 but SN says 96:rolleyes:

june 1995 that makes your car a 95 not a 96 but SN says 96

1 yes 2 no

He never told us what the SN on that car or build month........... but from what I understand......... but I dont know for sure feb 96 is the last non interference motor............. march 96 till 97 guessing game mystery motor....... New cars come out in october so if the car has a build date of 10/96 its a 1997 But in march 97 has a different T-belt kit.... I dont know whats different

Tuff call since your gauge works I id say dash ...........Me Ive never seen the LGL on any my vehicles never let it get that low

zero fill now .............you should never let you tank go below 3/4

I personaly drove about 40 miles without a drop of oil in the rear end, IH scout. . I lost the nut that holds the pinion gear. pinion slamed in to ring broke two teeth on ring in half. rearend locked up anyways found the nut about 3miles down the road.... lucky I had my tools.... pulled cover beat the pinion into place tightend the pinion nut reinstalled cover drove home...... put oil in it called it good. drove that scout for years with those teeth. And ATF is a cleaner....... I drive motors with 50 50 ATF deisel in them cleans the crap out

try posting in parts wanted

go to dealer get new TC seal .........install ...........place TC on shaft spin L&R till you feel & hear 3 clicks, thunks ..... thats for a chevy I cant see any difference for a 4eat maybe the amount of thunks bolt motor &tran together ........then ........the flex plate

those are subaru OEM gaskets the bad head gaskets are destroyed you cant get them. Subaru knew they were shoty redeveloped new ones and destroyed the remaining Toyota did the same thing with the V6 headgasket

You betcha I hate that fake crap. dino only

dino oil only use real out out of the earth dino oil dont use that fake crap you look at a truck 2,000,000 miles plus 80,000 lbs plus they use real oil not that fake crap subaru puts real oil in at the factory not fake crap chevron is the best or napa which is also chevron

^^^^^^^^^^^^^x2^^^^^^^^^^^^^^^^^^

I'm going to add a little to the torque bind. Like Lostinthe202 said tight circles left and right............Do it in reverse also ..in forward motion you might not feel it as you would in reverse Good luck

I just found that out also so there a nogo thanks

I heard there brighter .........other than that I know zilch http://cgi.ebay.com/ebaymotors/JDM-SUBARU-LEGACY-PROJECTOR-HEADLIGHTS-MINT-OEM_W0QQitemZ370312846908QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item56385d9e3c what do you guys know Pros cons are they glass or plastic wiring scale 1 to 10 one being easy bulbs easy to get you know the rest thank you Bob

blanket statement ya prety much ..............but ..............if i lived in CA......... with all the smog laws in CA I would never buy a used out of state car $2000 suby or a $1,000,000 rolls............ the paper work aint worthit another if that car could pass why doesn't it got CA plates on it now ..........If that car had CA plates on it NOW it would be a different story your buying some else's headache................ keep your money walk away there are plenty of others out there is this the car http://humboldt.craigslist.org/cto/1583022374.html thats a FAKE outback, willing to trade for a a running car, he cant get it to pass