hellosubaru

Awesome, thanks for the help guys. I've read through 'chux writeup a couple dozen times, along with his harness info pdf that he sends out with his harnesses he cuts down. I've also read through most of the FSM pages regarding electrical. I just want to make absolutely sure of everything before a tape / loom up, and for a hopefully flawless execution. Thanks again, -Jason

Ok, I'm going to rattle off a bunch of questions with pics, hopefully some (or all) of these can be answered! What do these four connectors go to? They come out in the middle of the firewall on the Legacy, and go on the manifold area: Does this plug go to the dash? What are the wires that remain, tach, temp, oil light? The colors are Red Green, White Green, and Green White: This goes up to the alt, but the one tiny plug wasn't plugged into anything, what is it for? Are these three yellow wires for switched 12v? Also, is the short, fat white wire supposed to go directly to the positive terminal on the battery? This is for the starter. Should I use this plug that is wired into the EJ harness, or should I splice the wiring coming out of the ECU into the EA harness and remove this plug? Here is a picture of the whole thing laid out for reference. Is there too much left? Did I delete something I shouldn't have? Labeled: Thanks everyone, I appreciate it! -Jason