areez Posted February 11, 2010 Share Posted February 11, 2010 Ill need alot of help with the vacuum hoses in my EA82T Subaru RX 1988. I have uploaded some pics with the lines i dont know where they should go. Can someone please take a picture of these lines or a good drawing where they should go and so on The car is being sold this weekend thats why i want it fixed. Cant find any good picture on the net. The black plastic T-cross on the second picture i dont think should be there but all help with the lines would be great ! Quote Link to comment Share on other sites More sharing options...
Cougar Posted February 12, 2010 Share Posted February 12, 2010 Is there a drawing of the vacuum lines on the bottom side of the hood? Quote Link to comment Share on other sites More sharing options...
CHIM Posted February 12, 2010 Share Posted February 12, 2010 have a repair manual?, that might help ya. I could scan the the page and send it to ya if not. Quote Link to comment Share on other sites More sharing options...
Sonicfrog Posted February 12, 2010 Share Posted February 12, 2010 I'll help you in the morning... about 9:30 pacific time. I'll take some pics of my EA82AT Quote Link to comment Share on other sites More sharing options...
areez Posted February 12, 2010 Author Share Posted February 12, 2010 Hi. I dont have a repair manual and the schematics on the hood is barely readable But i dont think i will know exactly where all should go. Cant see all the lines on the drawing. But pictures from an engine would really help me Quote Link to comment Share on other sites More sharing options...
Sonicfrog Posted February 13, 2010 Share Posted February 13, 2010 Crap. I'm sorry I didn't get the pic today. I'm taking my engine apart tomorrow. I get pics then and get them to you. Quote Link to comment Share on other sites More sharing options...
Caboobaroo Posted February 13, 2010 Share Posted February 13, 2010 Lemme help a bit. I have a pic of where the lines in the third pic go. They go to the turbo. The line that goes to the boost switch on the top of pic three is for the boost light on the dash Quote Link to comment Share on other sites More sharing options...
Sonicfrog Posted February 13, 2010 Share Posted February 13, 2010 I took pictures.... and they suck. Here is what I can tell you. Top Line, from black sensor, connects to top pf intake manifold. The line below that connects to both the gas canister line in the other picture and the air intake that leads to the turbo. The line coming from the firewall goes into the relay pack where the other two hoses are. Hope this helps. Quote Link to comment Share on other sites More sharing options...
areez Posted February 24, 2010 Author Share Posted February 24, 2010 i can't see to get it right. I have taken some new pics on how i connected it now. Can someone pls explain what goes where if i have connected wrong. I will give all outputs and hoses a number so it's easier for me to know what goes where. I suck at english so i think it's there my problem is I numbred them from 1 - 7 and pls use the numbers when you explain. I know what the intake boot is and the canister in the front i call just as easy as black canister The pics: http://i45.tinypic.com/3038w0k.jpg http://i48.tinypic.com/2e4ezjt.jpg Some help really soon would be a killer thanks all for the help i got this far ! Quote Link to comment Share on other sites More sharing options...
T'subaru Posted February 25, 2010 Share Posted February 25, 2010 Ok, based on my '89 rx here is what I would try...but first I cant tell you what #5 is in the second picture. Does not show up in my '89 fsms, could be import or something we havnt seen much of. #1 and #3 join with a tee and run another hose from that tee to #4(I have a slightly diff set up,1/3 teed hose hits canister first before #4) see pic #2 goes to #7 with a check valve seperating them ( 2 different diameter hoses) #6 goes into your intake boot once installed. This is what I have on my 89 and 90 turbos, checked my 86, slightly diff from what you have Good luck Quote Link to comment Share on other sites More sharing options...
areez Posted February 25, 2010 Author Share Posted February 25, 2010 Then i did almost all right. But i dont have a clue where number 5 goes. But a great thanks to you ! Now 95% of all hoses is where they should be Quote Link to comment Share on other sites More sharing options...
T'subaru Posted February 25, 2010 Share Posted February 25, 2010 For the sh*** and giggles what year, model and where are you? How bout a good pic of the intake set up. Mark Quote Link to comment Share on other sites More sharing options...
areez Posted February 25, 2010 Author Share Posted February 25, 2010 For the sh*** and giggles what year' date=' model and where are you?How bout a good pic of the intake set up. Mark[/quote'] Its an 1988 Subaru RX Coupé. I'm from Sweden and the car is originaly sold here in Sweden. I dont know how much better pic thats needed, if i take a pic from a larger distance you won't see the hose that's number 5. Quote Link to comment Share on other sites More sharing options...
T'subaru Posted February 25, 2010 Share Posted February 25, 2010 sweden huh, cool. I'm thinking that 5 can be plugged. I think you have an additional vaccum nipple that my 3 cars do not ( thus a better picture ) heres a pic of how my ea82t's are set up for vac lines. Good luck Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.