I need the mid-pipe that has the flex joint. All aftermarket pipes omit the flex joint. I have an email into 1st subaru to see if this even exists anymore (it is listed on the website but a bit pricey)

 

nipper

http://www.jcwhitney.com/stainless-steel-exhaust-flex-coupler-kits/p2012408.jcwx. I don't know if this is what you were looking for or if it would help.

wohoo thats a start

reading the review of the above

""had to return item because it was too long for my use. item has very little sideways flexibility for installation but would be good once installed for absorbing vibrations." "

 

take into account this may be rigid almost like a regular solid pipe.

The one in the Justy is farily, er um, rigid. They are tuned not to transmit engine vibartion and movement. Yhere is a lot more forces from the engine then from your hands. This may also solve a problem I have had with Blus exhaust system since the lift.

 

nipper

your local auto parts store should have flex pipes in a variety of sizes.I know mine do.

Local as in high school dropouts working there are local as in mom and pop?

check with your independent muffler shops, my local shop sells parts as well

Been talking to DustysJusties. Heis considered to be the Guru of Justies. He said one can use a straight pipe. Thanks all.

 

When it gets on the road i will go to amuffler shop and see if they can do it cheaper then the part costs.