man they have camel races out there

 

as far as gears id say 2 haha they are so mellow

soooooooooooooooooooooo? if a tree falls in the forest, would it make a niose?

 

anybody?

 

are you guys having a cigarrette?

 

I feel like a bad date that got left at the doorstep

Wow! Wtf mate!? Here I am trying to figure out how to mate a rwd tranny to an EJ and you've already done it!

 

So question for you sir. For a rwd tranny that could support say 400 HP and shifts smooth and quick. What one of these toy trannies is my best choice for your adaptor? Im not familiar with the caracteristics of the toy trannys.

 

 

Oh and by the way........you are the MAN!

i have personally mated an r150 to 430 horse, no issue, the r151 is used in toyota trophy baja trucks. check out marlincrawler.com for bullit proof toyota trans

the R 151 was used on the 22re toyota turbo engines

sure is, and thy are saught after!for many other applications. also for those you dont know, the r150, is the same as a 151, with a different bell house, t case, and gearing

So sounds like a 2wd r150 is what I should be looking for. What exactly would I find one in? Most 22re powered stuff?

no, you will find a 2wd r150 in v6 equiped t-100 trucks , tacomas, 4runners, and pickups. also- if you happen to find an r154 in a supra, get it

You can't use the newer stuff, it's has to be the earlier short input shaft. Off the top of my head I want to say pre 96 stuff. But the r154 won't work because the input shaft if the long one.

 

I know there is a lot of pages, but it's all in this thread what works and what won't.

 

no, you will find a 2wd r150 in v6 equiped t-100 trucks , tacomas, 4runners, and pickups. also- if you happen to find an r154 in a supra, get it

Edited June 24, 201114 yr by mellow65

I agree, june of 96 or older, but thw 154 was offered as far back as 87

Hmmmmm well I say make sure you run it by bill. He's the The master here.

 

I agree, june of 96 or older, but thw 154 was offered as far back as 87

I knew I had it somewhere, here's the break down of the input shafts.

 

w-55-59 and pre 96 r 151 and r 150 = 6.5 inch input shaft

 

r 154 Toyota Supra turbo trans = 7.25 in input shaft

 

after 96 r 151 and r 150 V-6 Toyota trans = 7.50 input shaft

Hmm. The 2wd trucks were not so popular around here, and if they were 2wd they usually had a 4cyl in them.

 

Well gonna have to check the junk yard.

I could adjust out a pattern for the R 514 and the later R 150's but the reason the R 154 was avioded was because of the cost and availablity of them

but tha basic housing can be adjusted out

 

where ya been mellow?

It's called linear algebra, and doing a communication class in 4 weeks.

 

I think I have just given up on making it to the garage anytime soon. That or I need to have a beer party and get a bunch of people to give me a hand doing the little crap on my car. Although beer and doing stuff right on a car don't always go together.

the worst time of building a hot rod is when you find out it can be done, it takes away the challenge, then you get bored and aviod the build

 

Finishing is like when you dream your on the railroad tracks and a train is coming and you can only move in slow motion >;o)

 

put on your 'big boy boots' and make time to finish the build right after the beer party:)

I hear what you're saying. And trust me I do really want to finish it in my life time. It's just been moving and the head butting of living with my parents again that's killing me too.

 

I'm going to get to it, I just need a little more time for things to mellow out. And really it's only been about 2 months of down time on it. That's nothing compared to what some projects sit idle.

totally, i have been building my latest one for like 3 yrs already.looks like it might make a cross state move, hopefully this time it will actually get a shop!good things just take time!!!!!!cheers

Bill,

 

I am new to this site but I am on several other subie sites and stubled onto here and cant believe what I am seeing. I have owned a few STi's and am in the process of building a 4x4 toyota but I want a subie engine. I have a 2.0L wrx setup to put in there and it will be the perfect power setup for my needs compared to the old 22r. SOOO how do I get one of these setups from you? Do you have a webpage?

 

Thanks

Bill,

 

I am new to this site but I am on several other subie sites and stubled onto here and cant believe what I am seeing. I have owned a few STi's and am in the process of building a 4x4 toyota but I want a subie engine. I have a 2.0L wrx setup to put in there and it will be the perfect power setup for my needs compared to the old 22r. SOOO how do I get one of these setups from you? Do you have a webpage?

 

Thanks

 

thank you for the kind words, I wish I knew how to be more acsessable

my E mail is

japaneseauto1978@yahoo.com

 

I have had calls from Pakisitan and U.A.E, Dubai on this housing as well as Austrialia

Bill Hincher

3505 W Alexis Rd

Toledo,Ohio 43623

Damn Bill! Did you have any idea this B.H. would be so popular when you first got started on it?

It was ever ment to be a job >;o) it was only suposed to be a retirement hobby, but one thing lead to another which lead to another which took over all my time >;o)

 

 

 

Its all good >;o)

I think........I want to be you when I grow up. Lol.

i can make you real busy if yould like.. with all these wyotech dudes doin swaps n stuff im sure a few would be interested in your work:)

 

oh and i have updated pics on my build thread in the offroad section..

 

all i need now is the clutch disk (they sent the wrong one so im in the return process)

 

after i get the disk the tranny will go in and ill have more pics up

 

thank you for everything bill ill post the adapter to tranny pics on here as soon as its in there

Edited June 27, 201114 yr by True2Blue

I know I can say, and probably many people can now say, I'm damn glad i stumbled across you Bill.

 

I can remember in your first emails back to me you didn't even want to really do it, but i was like, i'll send you everything, just look at it.

 

I hope this does good stuff for you.