Legback Posted November 13, 2010 Share Posted November 13, 2010 I think I read it's a 1 inch o-ring on the ps reservoir. Can I get that at the ACE hardware store or does it have to come through the Subaru dealer? Link to comment Share on other sites More sharing options...
Allpar Mod Posted November 13, 2010 Share Posted November 13, 2010 O-ring are pretty much o-rings, but I'm sure this type of application requires a specific size. There just isn't circumference of the ring to take into consideration, but the thickness of the ring for any specific application. I'd not tempt fate and get the correct one from Subaru. Link to comment Share on other sites More sharing options...
Legback Posted November 13, 2010 Author Share Posted November 13, 2010 Satrdy Am... They may be open! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 13, 2010 Share Posted November 13, 2010 Reservoir is usually not the leak on those - it's usually the gasket on the back of the pump. But can't hurt to try it. GD Link to comment Share on other sites More sharing options...
Jim Ma Posted January 6, 2011 Share Posted January 6, 2011 Reservoir is usually not the leak on those - it's usually the gasket on the back of the pump. But can't hurt to try it. GD Is it a gasket or a o ring on the back of the pump? Is it available at dealer? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 6, 2011 Share Posted January 6, 2011 It's a gasket - I do not know if it's availible at the dealer or not. It's a metal gasket with a rubber seal molded and glued to it - I just clean them up, cover them in Loctite 518, and put them back in. GD Link to comment Share on other sites More sharing options...
Legback Posted January 7, 2011 Author Share Posted January 7, 2011 Is it one of these?? I think I saved the subaru label from the KIT they were in. Link to comment Share on other sites More sharing options...
Mike104 Posted January 7, 2011 Share Posted January 7, 2011 (edited) Subaru Lists two O-Ring P/Ns here: http://www.subarupartsforyou.com/cp_partlistbymod.php?subcat=Suspension+%26+Steering%2C+Pump+%26+Hoses 34427AA060 34427AC000 Not sure which one you need. There is a rebuild kit for the pump like this: If you go to http://www.opposedforces.com and select your vehicle, it should give you the pump kit P/N. Or you can do as GD suggests (clean the gasket and reassemble it with Locktite 518). Edited January 7, 2011 by Mike104 Link to comment Share on other sites More sharing options...
Jim Ma Posted January 9, 2011 Share Posted January 9, 2011 Power steering pump repair kit Subaru # 34419AA150 list $35 Link to comment Share on other sites More sharing options...
palfer Posted September 28, 2014 Share Posted September 28, 2014 Does anyone know where I can get the bearing shaft seal (0.3 in the diagram above)? I bought the kit but misplaced this one seal. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now