Jump to content
Ultimate Subaru Message Board

yes or no: I use unmodified TURBO EA axles when using a EJ trans and stock EA hubs.


biggreen96
 Share

Recommended Posts

  • 1 month later...
To add to the confusion that you're trying to clear up, the front wheel drive EJ gearboxes (not AWD) are still 23 inch spline.

 

But why you'd drop in the EJ and a front wheel drive gearbox is beyond me!

 

Cheers

 

Bennie

 

do not know if that is correct, as people on bbslegacy central sometimes go replace the fronts on the turbo cars with axles from FWD car, cause the shafts are beefier on the fwd model, think splines all same.

Link to comment
Share on other sites

do not know if that is correct, as people on bbslegacy central sometimes go replace the fronts on the turbo cars with axles from FWD car, cause the shafts are beefier on the fwd model, think splines all same.

 

All EJ autos are 4EAT's, which means 25 spline. It's the early FWD 5spds in Legacies and Imprezas up to 95 that are 23 spline.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...