So I've been looking all over and can't seem to find one.

 

I need this diagram to be able to splice my harness into my brat.

 

If someone has one please send me it.

 

Shortysayhi@yahoo.com

Edited May 17, 201213 yr by shortysayhi

Phase I or Phase II?

 

 

I could use one for a PHASE II...

Phase I or Phase II?

 

 

I could use one for a PHASE II...

 

ej22t is phase 1

ej22G is phase 2

 

Or so says wikipedia.

 

I need phase 1 according to wikipedia.

check the diagrams i sent you, they may be mostly the same. compare your ecu plugs, to the two files at the bottem of this, http://offroadingsubarus.com/downloads/EA2EJ.pdf if the ecu wires match up with color and place. itll work better than nothing. let me know how it goes.

 

you should take a picture of the ecu plugs and post it on here.

 

-Prwa

 

This pic?

hey in the wirte up, diagrams at the bottom, it tells you what turbo wires are there. F47 pin 20 "pressure exchange solenoid valve" F47 is the largest plug on there

 

 

http://www.numbchuxconversions.com/Files/FSMs/92%20Legacy%20Engine%20Wiring.pdf

 

 

almost all of these apply to your harness

 

what year is this harness?? take a picure of the ecu plug it selflooking into the wires

http://www.numbchuxconversions.com/Files/FSMs/1992_Legacy_ECU_I-O.pdf

 

 

all the ones that say turbo apply to you (mayby others). you can look at the pin number on the file and itll show you what wires it is in the pin, fallow it back through the harness and itll lead you to a plug LABLE IT

Its out of a 94 ej22t Wagon.

This will help w/the pinout on the ECU plugs - HERE.

 

GL,

Td