I'm finally hooking up the diff lock in my RX trans I swapped into my GL Wagon.

 

Anybody have any pinouts of the solenoids and switch, or a schematic on how you've done it?

 

NEED to get this done ASAP

I had a wiring diagram.....but it's pretty simple. The switch is just a double throw. switched 12v in, then out one way or the other, straight to one wire on each of the solenoids, other wire to the ground.

 

I set mine up with relays, but once I got it set up, I tested the draw on it, and it was only a couple amps.

I used to have it on my webshots account but somehow it's gone?

 

I have a FSM you could borrow