Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Weather Stripping?

Featured Replies

Is there a place I can buy new weather stripping? Is it possible to rejuvenate old weather stripping? Or should I just buy generic weather stripping and try and make it work?

 

Thanks

I use silicone spray to keep mine in good shape. Have not had to replace any yet... couple of '83's and '85's still look good.

I have used wd40 to freshen plastic or rubber. i would suggest silicone spray as well. I learned a trich from an old car dealer of using black RTV to fill tears, gaps, or holes in the trim.

 

If the trim dangles you can hook it back onto their little plastic clips, and tuck them in the channels (door frame). The 3m super weather strip adhesive works great for securing loose rubber. 

 

I am not aware of any aftermarket sources, but there may be some NOS availability, i would assume. Chances are you can salvage a piece in better condition. Be careful not to rip it where the little plastic plugs secure the ends.

Glycerin is far better than silicone for rejuvenating and maintaining rubber. It is a little messy so you should only use the smallest amount. I use a rag to wipe it into the rubber and the following day wipe over it again to remove any excess.

 

Glycerine actually rehydrates the rubber, where as silicone simply puts a coating on the surface.

Glycerin? like the kind you put on your skin? could you use this on jumpseats?

Yep that's the stuff... Might be a bit sticky on the jump seats though.

  • 4 weeks later...

Glycerin is far better than silicone for rejuvenating and maintaining rubber. It is a little messy so you should only use the smallest amount. I use a rag to wipe it into the rubber and the following day wipe over it again to remove any excess.

 

Glycerine actually rehydrates the rubber, where as silicone simply puts a coating on the surface.

 

Hey I used glycerin as you said. Works damn great! Thanks so much for the tip.

ok... I'm in.

Where does one get this Glycerin?  

Off topic question.... kind of....why would you put it on your skin?

You should be able to buy it at most grocery/department stores. It's used for all sorts of stuff, most notably to make soap, they used to use it for automotive antifreeze, and it's in lots of food products.

  • Author

I saw some at the local grocery store yesterday by the gold bond foot powder. I was not shopping for foot powder at the time.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.