September 15, 201312 yr Just thouught it was better than buying honda springs and these older cars can be droopy in the bum It was an okay idea, but leaves no travel. Probably would blow the tube off the perch/notches. Honda springs stiffer it up, but leave some travel still. Don't be affraid to cut a bit of coil if they are a tad stiff at first. Maybe 1/2 coil? 3/4?
October 18, 201312 yr Author Got some differnt tire Think they might get traction Only 27" tall 27x11r14 Edited October 18, 201312 yr by apintonut
November 24, 201312 yr Author well no updates ive been staying at valley medical center for almost a month now but wife is released and my new daughter hope marie lentz should be released this week!!!! then ill get back on the soob kart
November 24, 201312 yr Author They r both doing well just had a close call on losiing both. Ultra sound indicated that baby was 8lb tuurnned out she was 9lb 14oz and she got very stuck 1/2 way
December 14, 201312 yr Author back on the soob kart, well i unpiled it! still doing lay out. have alot of drilling of holes and notching tubing
February 16, 201412 yr Author Need help, need to know the distance between the the struts from center of struts to center of strut asap. P.s. its on a loyal or dl I had it written down and lost it. Edited February 16, 201412 yr by apintonut
February 16, 201412 yr My EA82 FSM just isnt as good as the EA81.The EA81 FSM has that info. But based off a quick measurement of my "86 GL EA82 from center strut nut to center strut nut straight across is about 40 1/4"inches. Hope this helps! Edited February 16, 201412 yr by 81EA81
February 16, 201412 yr EA81 GL yes, by about 3" The EA82 GL should be the same as any other EA82 Loyale or DL. Loyale body style was still called GL from 1985-89 Feel free to wait for others input, But I feel this is a solid fact. Edited February 16, 201412 yr by 81EA81
February 16, 201412 yr Author Sweet i went ahead and ran with it and it saved my butt from making a mistake That and im trying to squeeze a back seat in there so i moved the running gear forward a lil more than planed. So most likely never going to wheelie. :-(
February 17, 201412 yr the only thing narrower on early 3rd gens as opposed to later ones is the trans tunnel. progress looks good
May 6, 201411 yr Author Made a lil more progress. Its hard with a new baby can only work on it when the wife and i are both have the day off and i dont have paying work or helping some one or............... Edited May 6, 201411 yr by apintonut
May 6, 201411 yr Author Need to remake the diff drop so that its a little lower less cv angle and but thers no wieght on it so.....
May 6, 201411 yr Author This basterd here was to be tranny cross member but after most of my time spent on it and 2i retrys its scrap and start over time (and i have very little of that) Edited May 6, 201411 yr by apintonut
May 11, 201411 yr Author So I have been procrastinating on making the the strut mounts thinking it was going to be a pain in the butt had them made in an hour
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now