.095 HREW would be fine for this. But do not put faith in the strength of what you are using. You will be highly disappointed.

 

AND FOR FUuCKS SAKE use some PUNCTUATION!

Edited December 14, 201312 yr by monstaru

"this stuff is cool to and im havin fun it keeps my mind workin and gives me somethin to do"

 

im glad to read this.

keep workin and keep on experimenting.

thanks for sharing and please be safe......

theres way worse things an active mind can keep busy doing.

 

my subaru eases and chalanges my "minor OCD". I

enjoy it. It's nice to see yours does the same for you.

 

i think metal windows would be so cool! 8)

Edited December 15, 201312 yr by tron

 

test fit

 

the hollow doors make for a perfect speaker box

 

finaly gona put these to use they have been sitting in storage for almost 5 years now

i coated everything inside with egg create foam to keep the rattles down

thanks im hoping to be somewhere between the jeep speed trucks and a poison pinto type of look

 

 

Edited December 20, 201312 yr by ferp420

i would imagine thats how a subaru would look with a v8 in it lol

except both of those vehicles dont need to look backwards or sideways.On my dodge I put a camper shell on it andit extended my rearward blindspot 18" and that was enough to completly hide a toyota truck in an intersection and I clipped it at 2 mph. that jeepspeed doesn't have solid windows but a mesh decal that makes it look solid but can still be seen through.

except both of those vehicles dont need to look backwards or sideways.On my dodge I put a camper shell on it andit extended my rearward blindspot 18" and that was enough to completly hide a toyota truck in an intersection and I clipped it at 2 mph. that jeepspeed doesn't have solid windows but a mesh decal that makes it look solid but can still be seen through.

bummer drag dude about crushing a yota lol and if thats a decal then how do they get the filler neck to mount to the glass right in the middle of the decal

Edited December 21, 201312 yr by ferp420

KIDS DO NOT TRY THIS AT HOME

 

NOT TO OFFEND ANYONE  just sayin

Edited December 21, 201312 yr by ferp420

the toyota did more damage to my dodge then I did to it,I scratched it,and it dented my tin can bumper.

lost another 10lbs i think theres another 50lbs of this stuff

 

and theres this stuff not factory but still needs to go

and theres this stuff not factory but still needs to go

 

You might want to save those 2 axle nut washers.  They are a spring washer with a slight dome, and you need them to properly secure the hubs.

 

I'd look at the rig and make sure you have them on all 4 axlenuts.  Someone may have left them off in the past.

good eye those are spares going back under the seat

alittle progress got one side tacked together

 

im jumpin all over the place on this started working the body alittle