January 30, 201412 yr Hey guys! I completed my dual range swap but have some questions!! any help would be appreciated! So after my swap everything went okay,,, but eventually my clutch fork bent back,,, So my first question is: Are 4x4 clutch forks a little curved as apposed to 2wd clutch forks or did i bend it? Second what is the proper assembly for clutch forks?? i currently need to replace and have NO idea how to and my Hanes manual doesnt say how.... Car is a; 93 ,loyale, sedan, d/r swap, 5spd, 155k Thanks for any help, I can try to have pictures tomorrow.....
January 30, 201412 yr As far as whether you bent it I couldn't say without looking. To replace it you'll have to pull the transmission back out.
January 30, 201412 yr The difference is the clutch cable if the car was originally FWD. The threaded end on the FWD cable is a different length. I have used a lug nut as a spacer to correct this. Otherwise find the proper 4wd clutch cable and it should fit just right.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now