February 10, 201511 yr OKAY, I knew my intake was a little warped when I put it on,so I used two gaskets on each side and Indian Head shellac............AND.............IT leaked....I have decided to fix it,so I took it off and have two options since I cant find one anywhere (My local Knoxville Tn Pull a part has none for a long time now)...Option 1) : buy a piece of granite or marble and glue sandpaper to it and SELF MILL it ...OR Option 2) MACHINE SHOP....AND THEY ARE Pricey......so far 70-120 $... Any Ideas? Anyone have one to sell ? It's not warped ALOT in my opinion, but it does rock front to back on a flat surface... I just want it to be right and NOT LEAK.. THANKS FOR ANY HELP Edited February 10, 201511 yr by subarusaver
February 10, 201511 yr could you just snag another intake a jy? Probably less than machining the one you got
February 11, 201511 yr A piece of 1/4" plate glass would work nearly as well and be a lot less expensive.
February 11, 201511 yr A piece of 1/4" plate glass would work nearly as well and be a lot less expensive.
February 11, 201511 yr Author I have an spfi mani if you want it maybe I can ship it. thanks, but I need one for a carb.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now