Reinstalled engine after doing head gaskets. Its turning over and getting fuel, but not starting. Haven't checked for spark yet  because dont have a helper to turn it over. The cruse control light is on and cooling fans are running with the key on.

Edited January 23, 20188 yr by steve56

Make sure the large connectors at rear pass side are snapped together well.   Then check crank and cam sensors are connected.

Forgot to plug in coolant temp sensor. Pull codes. 

 

GD

Forgot to plug in coolant temp sensor. Pull codes. 

 

GD

First code is: coolant temp sensor circuit high voltage. Second code is: p0700 Transmission Control Malfunction

Great call. The coolant temp sensor was unplugged. Plugged it in and it started right up. Thank you.

Edited January 24, 20188 yr by steve56

Yeah that will get ya every time. Glad I could help. 

 

GD