December 26, 20196 yr Havent been on here much, but I'm trying to find out what's needed to run the nissan rear calipers on an ea82 car. The ones with the mechanical e brake hook up. I have a set, and planned on using them on my gl-10 since I converted to 5 lug, but it doesnt seem like the cables are long enough. Or there very well could be something I'm missing. I figured someone would know on here. Thanks ahead of time.
December 27, 20196 yr It's the cables you are having trouble with? I used cables and a handle from a first gen Legacy with rear disc, and was able to get it to work decently. Front-pull handle and cables will definitely not reach.
December 27, 20196 yr Author Yep, after talking to a couple other people, I found that to be the case. I actually tried sending you a message before posting this, but it said you cant accept messages.
December 27, 20196 yr Author How did you route the cables? Where did you have them exit the car through the floor?
December 29, 20196 yr Author Found this thread after doing a search on google, that answered my questions.
December 30, 20196 yr On 12/27/2019 at 5:05 PM, bratman18 said: How did you route the cables? Where did you have them exit the car through the floor? I cut holes in the top of the transmission tunnel just like on the EJ car, but the driveshaft rubbed on them under hard acceleration (it was a one-piece shaft, so that could have been part of it). If I were to do it again, I would just have them run straight through the bulkhead under the rear seat, as there's a lot more room for them.
February 24, 20206 yr On 2/21/2020 at 6:39 PM, bratman18 said: These are now for sale as I'll be going full ej brakes. New, used? Cost?
February 25, 20206 yr Author 8 hours ago, carfreak85 said: New, used? Cost? Used, but in good shape. Actually bought them from a member on here on the rust free coast haha. Open to offers!
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now