IdahoLoyale Posted July 11, 2021 Share Posted July 11, 2021 (edited) I have a 1990 Loyale that was a running parts car until I accidentally touched two exposed wires together in the radio area, and now the engine isn’t getting spark at the plugs. I want to move it around my property but can’t figure it out. I’ve swapped in a known good coil and tried “hot wiring” it by running a wire from the positive post of the battery to the positive side of the coil, but still no spark at the plugs. Any ideas how to Hotwire this so I can get it moved? Thank you. Edited July 11, 2021 by IdahoLoyale Quote Link to comment Share on other sites More sharing options...
DaveT Posted July 11, 2021 Share Posted July 11, 2021 Check all the fuses? Or at least that the ECU and coil gets power. 1 Quote Link to comment Share on other sites More sharing options...
Ionstorm66 Posted July 14, 2021 Share Posted July 14, 2021 Check the fusible links next to the battery. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.