loopchaser Posted Monday at 04:35 PM Share Posted Monday at 04:35 PM Hello Everyone I'm new and happy to be here. So I stripped the bolt holes torquing down my tensioner on my 97 legacy to 20 ft/lb(the one where the piston is separate from the pulley). Later I found out that the top end of the torque specs are 19.5... silly me. Im trying to figure out the bolt size to match up with a helicoil. I believe the part number for the bolt is 010508220, but cant find the size specs. Does anyone know? PS - I also just ordered the bracket it attaches to in case the helicoil fails... Thanks everyone, Loop Link to comment Share on other sites More sharing options...
lmdew Posted yesterday at 12:55 AM Share Posted yesterday at 12:55 AM 12mm bolt. I've used longer ones as well. Ace will have them, just take the old one and match it, but longer. Link to comment Share on other sites More sharing options...
loopchaser Posted yesterday at 02:25 AM Author Share Posted yesterday at 02:25 AM Ah I didn't think about using a longer bolt... Thanks! Link to comment Share on other sites More sharing options...
lmdew Posted 19 hours ago Share Posted 19 hours ago If you have a tap, run it in to clean the threads. If you don't have a tap, make you own by cutting a groves down the threads from head to end of the bolt. Grinder, file, hacksaw. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now