im pulling the engine trans and diff from a part car and sending the car off to the yard. i dont want to lay under the car and manipulate the transmission down. will it come out the top still bolted to the engine? 2001 legacy sedan

Edited 2 hours ago2 hr by sirtokesalot

Yes it can. But the angle can be quite extreme.

Better way to do it is separate the gearbox from the engine and pull them out from the top individually.

You’ll spend quite a bit of time under the car disconnecting mounts, driveshafts, wiring etc.

Remove the gearbox crossmember to give more room if going for the one piece removal.

I've pulled them attached. Yes the angle is significant.

The other way to do it is to drop it out the bottom. The cross member and trans mount will unbolt.

Raise the car or lower the cross member/engine-trans.