LeDevil Posted August 21, 2004 Share Posted August 21, 2004 Ok my car was runny ****ty and I couldnt figure out why until my spark plug came out when I tryed to pull my spark plug wire off to check it any Idea on why it made it self LOOSE or come out any ways of prventing this? Thanks -LeDevil Quote Link to comment Share on other sites More sharing options...
the_bard Posted August 21, 2004 Share Posted August 21, 2004 My dad's old Ford pickup did this once... we never did figure it out. Going down the driveway, sounded like it was missing a cylinder. Popped the hood, and the plug was sitting there on the block. Kinda funny, in retrospect, but at the time, we were pretty confused. Quote Link to comment Share on other sites More sharing options...
GLCraig Posted August 21, 2004 Share Posted August 21, 2004 It may have become loose because it was not sufficiently tightened or because the threads in the hole are bad. Try torquing the plug to 15 ft*lbf, if it comes loose again the chances are that the threads are bad. Quote Link to comment Share on other sites More sharing options...
Vince Posted August 21, 2004 Share Posted August 21, 2004 I had this problem withan 84 gl. The hole was cross threaded and a simple re-tap fixed it up quick. This is a common thing with aluminum heads. Quote Link to comment Share on other sites More sharing options...
LeDevil Posted August 25, 2004 Author Share Posted August 25, 2004 Cool, Thanks for the help LeDevil Quote Link to comment Share on other sites More sharing options...
teasdam Posted August 27, 2004 Share Posted August 27, 2004 I had this problem withan 84 gl. The hole was cross threaded and a simple re-tap fixed it up quick. This is a common thing with aluminum heads. speaking of which...I need to retap a plug hole and I have some question. What size and thread tap do I need? What do you do about shavings that drop into the cylinder? Anyone know a good place to order a tap? (I had a helluva time trying to find the right size/thread for the head bolts...I finally gave up.) Quote Link to comment Share on other sites More sharing options...
boing Posted August 28, 2004 Share Posted August 28, 2004 I think I'd try a helicoil. They have some that just screw into the damaged thread. Tell the parts house what you have and ask what ya need for it. wish ya smooth threading. boing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.