September 9, 200421 yr OK, I'm getting ready to strip out EVERY last wire from my EA81 wagon and make a new harness for it. But I need to know where the 2 wires from the dizy go to My harness is soooooo bad that I can't even trace them out Also, is all the ignition housed in the dizy, or is there an ignition box hiding some where that I haven't found? This is on an '82 DL wagon.
September 9, 200421 yr the two dizzy wires should go to either side of the coil. not part of the harness at all. the 82 dizzy should have all the IGN stuff inside. nothing external.
September 9, 200421 yr and if its like mine, the red goes to the + and the yellow goes to the negative, but... it may not matter.
September 9, 200421 yr Author That's to eazy So it just gets it's power from the + side of the coil, and then sends the signal back to it on the - side!?!?
September 9, 200421 yr well, on the negative side you will also have a tach wire coming off the coil, and there needs to be a power wire going to the +side of the coil, along with the one coming off the distributor.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now