goatman Posted September 13, 2004 Share Posted September 13, 2004 Well I went to Pull-and-Save today but I couldn't get all the stuff I needed to do the rear disk brake conversion. So I still need to deal with the fact that my rear drums are way out of adjustment and I can't get the adjusters to move.(its an 84 4wd wagon) Does anybody no the part # for these adjusters? Is it a dealer only part or maybe NAPA or Schucks? Thanks. Quote Link to comment Share on other sites More sharing options...
GLCraig Posted September 13, 2004 Share Posted September 13, 2004 They are probably a dealer only item. Now have you tried to take your's apart, clean it up and make it work again? it's not that hard to do. Quote Link to comment Share on other sites More sharing options...
goatman Posted September 13, 2004 Author Share Posted September 13, 2004 I tried to unbolt one today and one of the two bolts just broke right off! I even sprayed some pentrating lube in there and tried to be gentle with it. Quote Link to comment Share on other sites More sharing options...
Turbone Posted September 13, 2004 Share Posted September 13, 2004 What other parts do you need for the rear discs? Quote Link to comment Share on other sites More sharing options...
goatman Posted September 13, 2004 Author Share Posted September 13, 2004 I still need all the parts for the rear disk conversion. I found one 4wd turbo subie at Pull-and-Save but the rear disks and calipers were in horrrible shape. Quote Link to comment Share on other sites More sharing options...
Partsman Posted September 13, 2004 Share Posted September 13, 2004 NAPA (United) #81392 Beck-Arnley #085-0116 They cost around $24 each! Maybe you should just do the conversion. Rear brakes (drum) don't do all that much anyway unless you're driving hard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.