bajavwnsoobnut Posted November 1, 2004 Share Posted November 1, 2004 as it says what IS the proper jetting for the weber to run on the EA-81 I want to know cause of I am getting a weber soon from Edrach and am gonna rebuild it but would like to start out with the correct jettings in there so I don't need to be tinkering with it Quote Link to comment Share on other sites More sharing options...
chef_tim Posted November 1, 2004 Share Posted November 1, 2004 Hey jason, there is no one magic set of numbers for these things. Alot of it depends on what you want out of your car. Top-end, bottem end torque, economy etc etc. a good set of numbers to start with is : 140 for both mains, 60 primary idle 55 secondary idle, and 165 primary A/C and 160 secondary A/C. That is what I have in my Hatch, I got lots of lowend torque, no high end, and fantasticly low MPG i.e. 17....'Course that's with 28 Swammpers too. Another thing to remember is to set the float correctly. Later, Tim Quote Link to comment Share on other sites More sharing options...
TomRhere Posted November 1, 2004 Share Posted November 1, 2004 As Tim said, no one set of numbers for doing the Weber swap. But info here http://homepage.powerup.com.au/~camncath/retrofitting_the_weber_dgav_32.htm Might help you get a grip on things.......... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.