Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

creaky clutch

Featured Replies

I have a '99 ob wagon 5 speed that has developed a creak when depressing the clutch especially bad when engine is warm and in heavy stop and go traffic. Creak is definitely coming from the engine compartment. Also noticed that sometimes when engine is warm and used clutch a lot the peddle "sticks" in down position when depressed and doesn't want to return to return. All is ok when engine is cool? Any ideas? Slave cylinder?

The shaft that the clutch throw out bearing slides on needs lubrication.

 

If you remove the intake/air filter box, then detach the clutch cable - or slave cylinder, and remove the rubber boot around the clutch fork you will gain access.

 

It's tight, but a long brush with a bit of high temp grease on it (copper or lithium) should cure the creaking.

think that might help the cricket sound coming from my clutch? mine only makes noise when my foot is lightly on the pedal, goes away when foot it into it or when completely off the pedal.

 

 

 

 

 

The shaft that the clutch throw out bearing slides on needs lubrication.

 

If you remove the intake/air filter box, then detach the clutch cable - or slave cylinder, and remove the rubber boot around the clutch fork you will gain access.

 

It's tight, but a long brush with a bit of high temp grease on it (copper or lithium) should cure the creaking.

Rally, that sounds more like wear inside the bearing. The shaft I mentioned is only for sliding, no rotation on it.

subyrally,

doesn't that suck, just when you think you got an easy solution......DANG IT!!!

yeah, my noise is coming from the little thingamajig at the end of the clutch cable, its rattling in the clutch fork. i just need a bushing there and it wont make noise.

  • 3 months later...

don't worry about it - just turn up the radio louder. All subs do this eventually, and it's not worth the cash or trouble to fix it.....

the sticking down usually means its time for a new slave and or master cyl. You can get by bleeding it for a while but there is a TSB on this.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.