mbrickell Posted February 23, 2006 Share Posted February 23, 2006 Out of interest in my Loyale's minor hesitation issue ( when warm, seems to run perfect for the first 2-3 min in the AM ), I observed the codes per the white connection procedure found in various threads. I get one long flash and one short flash, seems like 11. That is it. No CEL. Now, would that not indicate Cam Position Sensor issues? Interesting, because I thought this would mean no start. Hmm...car starts and runs decent. Changed o2 sensor, no effect seen. Link to comment Share on other sites More sharing options...
Holmes Posted February 24, 2006 Share Posted February 24, 2006 I remember reading somewhere that crank angle codes can show up if the car stalls. I had two of them and they went away when I cleared the ECU. It could be an old code if you've never cleared 'em. Link to comment Share on other sites More sharing options...
subiemech85 Posted February 25, 2006 Share Posted February 25, 2006 SPFI or MPFI????? IF SPFI, wires # 19 power (output) 20 signal (reference) 21 signal (position) code 11 = crank angle sensor (No reference pulse) IF MPFI, wires # 7 (power) 8 (reference) Link to comment Share on other sites More sharing options...
mbrickell Posted February 25, 2006 Author Share Posted February 25, 2006 SPFI or MPFI?????IF SPFI, wires # 19 power (output) 20 signal (reference) 21 signal (position) code 11 = crank angle sensor (No reference pulse) IF MPFI, wires # 7 (power) 8 (reference) SPFI Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now