I've always liked the looks of a Brat, especially the gen 1, but I've never had the chance to ride in one. This has probably been asked a hundred times (I did do a search, but couldn't find any info) can a six foot, 200 pounder, fit comfortably in a gen 1 Brat? If not, how about the gen 2? Just for some reference, I have a '75 Subaru DL, 2 door, and it is fine for headroom, but a little short for legroom. I also have an '89 Justy, and it is good both ways. Thanks for any comments.

I'm 6'2" and 210 lbs, and I can fit fine in my Gen 2. I did replace the seats with Izuzu Impulse seats, which sit about 2" lower. Gives more legroom and headroom. But I could and did drive it with the stock seats as well.

 

GD

6'2" & 225# here, and I fit just fine in the 2nd Gens I have. All have/had stock seats except the '82. Those have been recovered, but I still fit easily.

I'm 5'8" and feel fine in either. I did change out the stock wheel with a smaller style wheel. It makes it harder to turn, so I'm changing it back out to a stock wheel. Tim who is the same height feels very uncomfortable in the Gen 1.

 

Check your shoe size on the Gen 1. We have had a few big-footed teens sit in the Gen 1 and they can't use the gas without hitting the brake pedal.

6ft 230 lbs here, and i fit fine with stock seats. gen 1s are a little tight, but gen 2s are pretty roomy. my pop is 6ft 4 inches 270 pounds and he also fits comfortably in a gen 2 with stock seats, infact he drove a gen 2 brat for 2 years daily!

 

when i first bought my red hatch, the lady who owned it must have been a 400 pounder, the seat was broken down, but the lady bought the car new in 84, and had been driving it up until 05!!

Thanks for all the replies. I think I'll hold out for a gen 2.