Numbchux Posted June 2, 2006 Share Posted June 2, 2006 how much of the main harness/ECU is effected by the tranny setup? my donor car is a FWD 4EAT....will that make things drastically more difficult? Quote Link to comment Share on other sites More sharing options...
NoahDL88 Posted June 2, 2006 Share Posted June 2, 2006 theres an extra set of plugs, but as long as the neutral safety switch is jumped, and the 5 volt reference wire is made to be the opposite of what it is now, ( it varies depending on year) then it should work just fine. just a few more wires to trim, nothing i'd get worried about though. Quote Link to comment Share on other sites More sharing options...
Numbchux Posted June 2, 2006 Author Share Posted June 2, 2006 theres an extra set of plugs, but as long as the neutral safety switch is jumped, and the 5 volt reference wire is made to be the opposite of what it is now, ( it varies depending on year) then it should work just fine. just a few more wires to trim, nothing i'd get worried about though. sweet, thanks man Quote Link to comment Share on other sites More sharing options...
ballitch Posted June 3, 2006 Share Posted June 3, 2006 that and the cutting of the wire that tells the ECU its a manual tranny and not a auto, not a big deal. its just easier to start out with a M/T ecu and harness is all. ~Josh~ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.