Im finishing up my weber install... last thing I gotta do is wire the electric choke? What do I tap into???

 

THanks,

-Brian

Should be a 3 wire connector for the Hitachi - two of those are hot in run at all times - one is for the electric choke on the Hitachi, and the other is for the idle fuel cut solenoid. Just take the pig-tail off the Hitachi, and run the same wire to the choke that was being used before.

 

GD

Gotchya....

 

thanks

-Brian

Make sure to insulate the unused wires well plus make sure the choke wire is on there nice and tight. Mine came free once and made be blow a fuse :-\

Make sure to insulate the unused wires well plus make sure the choke wire is on there nice and tight. Mine came free once and made be blow a fuse :-\

 

Yes indeed - and on the EA81 that same fuse controls the Brake lamps , so you'll know real quick when the cops pull you over.

 

GD

Ah... good point, i left them hanging there. I'll have to make sure i go back and take care of that.

 

-Brian