how do i find a GT steering wheel for my 87 that will fit? what about racing/bucket seats (with sholder straps) wil any bolt up or do i need to make adapters?

 

 

 

 

Project RALYRU (rally ru, thats how it will look on my plates:headbang: ) has started...

You'll need a boss kit for a new steering wheel, keep an eye out on ebay for the type of wheel you want, then get a boss kit to fit your car and the wheels bolt pattern (6 or 5 bolts is the commen sort.)

 

As for seats you are going to have custom up some rails.. But if its a serious project that should be the least of your troubles...

 

Am I just pointing out the obvious? Sometimes I think I'm losing my mind..

just makin sure before i go to do it and get al sorts of pissed off at myself for not askin stupid questions:-p

... Project RALYRU (rally ru, thats how it will look on my plates ) has started ...

 

Pics Please! ... Good Luck!

ill take pics of the car tonight ofter the brat goes to the scrap yard.

 

so these will be my before pics...

Well, I had a set of 3A Racing seats in my 86 Brat. I used the stock sliders from the decrepid seats that were in it. Drill 4 new holes, one per slider and used the stock screws to hold them on. They bolted right into place perfectly...

sounds like my route...

 

rally on:headbang:

 

thanks!

If you want some pics of the modified seat sliders, just let me know. One is still out of the car currently.

oh, sure! so i can get the detailed idea. i have a basic idea of how its goin to go right now. im not 100% on it tho

oh, sure! so i can get the detailed idea. i have a basic idea of how its goin to go right now. im not 100% on it tho

 

 

 

 

 

pulled my steering wheel today! it should bolt right up:banana:

 

pic of it

Here ya go. I used the stock hole at the front of the sliders and drilled the new one at the back of them. That way I kept the relation to the pedals and dash close to stock.

 

These are the redrilled ones, its about an 1" to 1.25" difference in the particular seat model I have.