Hi all , I removed the A/C junk from my Australian spec 86 L RX Turbo - all except the compressor . Can anyone tell me what length belts to use on an EA82 with power steer and the A'C pump removed . I have a set of non A/C alternator mounts to place it where the A/C comp now lives . BTW we don't have smog pumps on our cars , not sure if USDM cars do .

 

Thanks in advance , cheers Adrian .

You can get a good idea by wrapping a rope around the belts (that has a close dia to the v-belt) and then tying or taping the ends together to hold length. Some of the better gear head mom and pop auto stores will still have a belt sizer. This is used to measure belts length (between two fixed 1/2 moon pullies).

 

nipper

Belt should be the same as a non-AC, non-PS DL EA82. You didn't get those there?

 

Anyway - should be the same belt used by the EA81's for the Alternator.

 

GD