Davalos Posted May 6, 2008 Share Posted May 6, 2008 Well, I sure did it this time, hehe... Backing up, I pulled a little too close to a trash can and I (what I thought was) innocently "nudged" the drivers' mirror to the point where it folded forward by about 45 degrees. Now it's a little "off-kilter". Kinda sagging off from the top now. I can still use it, but it certanly looks kinda funny. Are there springs or anything in there that can be replaced in there? I haven't cracked-it-open yet. It's not power or anything. I'll see if I can get some pics ... Quote Link to comment Share on other sites More sharing options...
Turbone Posted May 6, 2008 Share Posted May 6, 2008 You can try and straighten it out once you take it off. But its hardly worth the effort, theres plenty of mirrors available. Of course, I have several Quote Link to comment Share on other sites More sharing options...
Gloyale Posted May 6, 2008 Share Posted May 6, 2008 There are three balls that ride in a track at hte base of the mirror. There are detents in the track, which are the *in place* spots. When you fold the mirror out, sometimes the one or more of those little ball fall out. I've been able to shim a ball bearing back intop the track by carefully prying up the mirror and pushing the ball under. IIRC, the mirror must be rotated about 45 deg forward to access the track. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.