July 9, 200817 yr I need to install the 1/2 moon plastic peices 2 per head they fit in the corner. What is the proper method? Thank You
July 9, 200817 yr Maybe I am ignorant but could you describe what you are working on? If you mean the 1/2 moon pieces by the cams then I believe you put them in place with some good permatex sealant around the edges.
July 9, 200817 yr Author I am replacing the HG on my 2.5. They are the little black plastic peices in the corner. They look like they had grey sealant. The engine shop said I should use glue.
July 10, 200817 yr Use Permatex Ultra Gray 599 sealant. Thoroughly clean the surfaces where they attach to the heads, use plenty of 599: too little leaks. Emily http://www.ccrengines.com
July 10, 200817 yr Use Permatex Ultra Gray 599 sealant. Thoroughly clean the surfaces where they attach to the heads, use plenty of 599: too little leaks. Emily http://www.ccrengines.com And that comes from a lady who knows her stuff . . . even is she is semi-retired! (Thanks Emily for hanging with us.)
July 10, 200817 yr And that comes from a lady who knows her stuff . . . even is she is semi-retired! (Thanks Emily for hanging with us.) Hangin' tight! Emily http://www.ccrengines.com
July 11, 200817 yr put a little dab of the sealant on the valve cover gasket anywhere it makes a sharp corner up or down (from the plane of the head) too.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now