The Dude Abides Posted August 15, 2008 Share Posted August 15, 2008 But what do you think about these chevy wheels on a loyle. I think with the backspaceing they will fit better then some others. What do ya think. Quote Link to comment Share on other sites More sharing options...
Reveeen Posted August 15, 2008 Share Posted August 15, 2008 But, do you really want the "back spacing"? By the time you get a tire on those wheels you would have to check the clearance between the tire and the strut spring mounts. Good idea (on your part), offset inwards would really take the stress off of the wheel bearings, but you have the front strut spring seats to contend with. I suppose you could fabricate some kind of coil over shock replacement that uses a smaller diameter spring. Quote Link to comment Share on other sites More sharing options...
Phizinza Posted August 17, 2008 Share Posted August 17, 2008 How wide are they and whats the offset? Quote Link to comment Share on other sites More sharing options...
The Dude Abides Posted August 17, 2008 Author Share Posted August 17, 2008 there 16x7 im not sure of the offset. Whatever came factory on the 93-99 full size silverados. Ben Quote Link to comment Share on other sites More sharing options...
mcbrat Posted August 18, 2008 Share Posted August 18, 2008 since they are alloys, you'd need to drill the hubs and drums on the soob and do the 6 lug conversion.... Quote Link to comment Share on other sites More sharing options...
The Dude Abides Posted August 18, 2008 Author Share Posted August 18, 2008 since they are alloys, you'd need to drill the hubs and drums on the soob and do the 6 lug conversion.... sadly i know but i dont know mick. The offset on these is different then most of the aftermarket ones. I just dont know how it would turn out. Ben Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.