February 1, 200917 yr I recently purchased a used Weber from one eye, and i'm going to rebuild it. the problem is that i cant find any instructions on how to do it. I've done a search of the forums, but anything that comes up has been deleted. HELP
February 1, 200917 yr Buy a rebuild kit and replace any parts that come in it. If it needs throttle shaft bushings you will need to find a machine shop that can install and properly ream them. Don't touch the throttle plates unless rebushing is required. Otherwise you will have to reset the plates and that is not a first-timer friendly procedure. Otherwise - dissasemble, replace parts, reassemble. It's not rocket science. If you aren't comfortable taking things apart with many tiny peices then you should definately find someone else to do it or just buy a new one. Frankly for the price you would be way ahead of the game to get a new one. GD
February 1, 200917 yr go here: http://www.indysworld.com/80s/general/haynes/haynes-weber.html If that is not what you need PM me and I can scan step by step instructions, But I think that is what you will find by following the link. Good luck.
February 1, 200917 yr Author Yes, it would be a good idea to get a new one, but I already have the used carb, rebuild kit, and adapter plate so i might as well keep going. And when i was talking to my dad about it, he mentioned boiling parts? Edited February 1, 200917 yr by Markus56
February 1, 200917 yr You wan't carb cleaner - boiling will do nothing. Get the stuff in the 1 gallon pail with the parts strainer. It's nasty stuff so watch out. Yet another cost involved with rebuilding carbs where your money is better spent buying a nice shiny new one. GD
February 1, 200917 yr Look for the Part that Says: "Here are all the technical articles you are looking for, including parts breakdown diagrams" Here: http://www.webercarburetors.com/ That`s the Place where I Obtained the "Nice Shiny New One" in the Kit K-731 for my EA82, some time Ago... Good Luck! Edited February 1, 200917 yr by Loyale 2.7 Turbo
February 1, 200917 yr I thought of buying a new one to put in my brumby. Sadly the cost to buy one and get it here for me would cost far to much. so i will go and rebuild it. the kit here is about 30 dollars
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now