February 2, 200917 yr What I've got: '86 GL Wagon 4x4. Original 1.8L with 190K on it. Dual range tranny. Mostly stock, except for the few changes I've already done. What I want: A daily driver that can handle "4x4 only" roads. EJ22 swap, once the EA82 gives up the goat Turbo type muffler 4" body lift Drilled 14" wheels with same offset 225/70R14 Liberators or 27/8.5R14 Kuhmo ventures Bumper mounted Hella 500's Rack mounted Hella 5" work lights, front and rear Custom safari basket, maybe bumpers New bucket seats, OB, XT, or anything What I've done: Not much! I've been working on making the soob reliable above all. All tune up stuff done Beck Arnley 180* thermostat 6 months ago Napa premium 190* since other failed Accel Superstock coil Jerry Demoss match ported intake with rebuit weber 32/36 Manual choke cus the auto don't fit Cobra CB Yakima rack and 3' firestick antenna Feel free to suggest anything else or different. Lots more to come soon...with plenty o' pics!
February 2, 200917 yr Looks great! Are you from Blaine, MN? I live down in Owatonna, and its always fun to meet another midwest Suby lover! Kurt
February 2, 200917 yr Author Looks great! Are you from Blaine, MN? I live down in Owatonna, and its always fun to meet another midwest Suby lover! Kurt Blaine, Wa. Not too bad for pizza cutter wheels and all, huh? Next up is the lift with pizza cutters.
February 2, 200917 yr Sounds like a solid plan ya got there, pretty much the same thing Im workin on on a small project of mine, except Ive got a few "durability upgrades" in the works, basically I want mine to be able to take a beating repeatedly, with no love. We shall see how it goes. Yours is a lot nicer than mine, and i had to start with a 3at (swapping to 5spd D/R). Looks like it will be fun when done! -Bill
February 2, 200917 yr my first subaru was a twin to yours, i did the same things you got done so far, but it ended up with 4w disk brakes, RX ground FX, exhaust, loud stereo, 8 spoke gold enkei's, XT6 sway bars and impreza seats. good luck with your project.
February 2, 200917 yr Eric, Will (3eyedwagon) found that the late 80'/ early 90's mazda Wheels are real close the corect offset, This is what his look like with about 28s or so. Will you can call me out if I'm wrong but I think that is pretty close. Jeff
February 2, 200917 yr Yours is a lot nicer than mine, and i had to start with a 3at (swapping to 5spd D/R). Looks like it will be fun when done!-Bill Bill is this the for the trans I sold ya? Jeff
February 2, 200917 yr Author my first subaru was a twin to yours, i did the same things you got done so far, but it ended up with 4w disk brakes, RX ground FX, exhaust, loud stereo, 8 spoke gold enkei's, XT6 sway bars and impreza seats. good luck with your project. Thanx, add 4w disk brakes to the list. And Bill...glad I never picked up that craptatchi of yours, but too bad we didn't meet. Maybe next time we head over to benton city.
February 2, 200917 yr Bill is this the for the trans I sold ya? Jeff Yep. I had all the other parts I need but the car they are in had a single range tranny. Ill post pics of the rig when I finish it, it will be savage, but nothing really earth shattering. just a reliable, abuse taking go anywhere rig with some cool and useful features. PS sorry about the thread jack, i really want to see this wagon when its done! -Bill
February 2, 200917 yr Thanx, add 4w disk brakes to the list. And Bill...glad I never picked up that craptatchi of yours, but too bad we didn't meet. Maybe next time we head over to benton city. No harm no foul man, looks like you made out like a bandit with that Weber! We hunt Racoon down near Benton City alot... We'll have to go wheelin sometime after I have a capable rig back on the road -Bill
February 2, 200917 yr Author Eric, Will (3eyedwagon) found that the late 80'/ early 90's mazda Wheels are real close the corect offset, This is what his look like with about 28s or so. Will you can call me out if I'm wrong but I think that is pretty close. Jeff NIIIICCCCCCCEEEEEEE! I was planning on getting my wheels from a local place called Beacon. They've got a mountain of wheels out back for something like $10/wheel. It'll just take a lot of sortin with a tape measure, but sure I'll end up with mazda's!
February 2, 200917 yr NIIIICCCCCCCEEEEEEE! I was planning on getting my wheels from a local place called Beacon. They've got a mountain of wheels out back for something like $10/wheel. It'll just take a lot of sortin with a tape measure, but sure I'll end up with mazda's! Right on, I've been up there a bunch of times, Lots of stuff there, Pull a Part in Smokey point would be a good place to get a set too. Same price there. and No so much digging. Jeff
February 2, 200917 yr Author Right on, I've been up there a bunch of times, Lots of stuff there, Pull a Part in Smokey point would be a good place to get a set too. Same price there. and No so much digging. Jeff I'll have to mapquest that...not sure where smokey point is, but beacon would be some serious diggin. Bill, we'll do that sometime. I haven't wheeled much, but love doing different terrains. Ever eat that racoon...tastes like chicken?
February 2, 200917 yr God no, my friend is a Taxidermist, he uses the hides, he and I wouldnt eat one of those grubbers unless we absolutely had to. -Bill
February 2, 200917 yr Author God no, my friend is a Taxidermist, he uses the hides, he and I wouldnt eat one of those grubbers unless we absolutely had to. -Bill I'm all for trying new eats, but seen too many in my trash can. Add racoon tail antenna flag to list. :-\
February 2, 200917 yr I'll have to mapquest that...not sure where smokey point is, but beacon would be some serious diggin. Bill, we'll do that sometime. I haven't wheeled much, but love doing different terrains. Ever eat that racoon...tastes like chicken? It is next to the Arlington Airport. Jeff
February 2, 200917 yr Author It is next to the Arlington Airport. Jeff Not far from your place then. I'd like to see your soob collection sometime, too. B'ham really needs a good yard, lummi wrecking is the worst yard ever.
February 2, 200917 yr Dude raccoon is a very good meat I ate a few and I never knew until someone told me and I still ate it after that
February 2, 200917 yr oh yeah add spare wheel and tire holder in the back after replacing a tire or two you will want the spare a lot closer to the ground
February 3, 200917 yr Author oh yeah add spare wheel and tire holder in the back after replacing a tire or two you will want the spare a lot closer to the ground That makes sense. I like the looks of spare up on the roof, but looks aren't important. (Ask Scott or Jeff...they've seen me!) Then again, the look of a racoon tail on the firestick I think I can do without! Add GM alternator to the list.
February 3, 200917 yr Then again, the look of a racoon tail on the firestick I think I can do without! Oh come-un be the first on your block :lol::lol:
February 3, 200917 yr Author Oh come-un be the first on your block :lol::lol: ...or the first in the state!!!
February 16, 200917 yr Author Well, I haven't had much time or money to work on the snail. Been spending a lot of both on a Ford. I did do a few things today, though, and best of all...didn't cost me a dime! Disconnected front sway bar on pass. side. I believe from searching around here, that will be same as fully removing it. I'll drive it like that to work for a while, before pulling the whole thing. Still have to do rear's. Finally got a good, used taillight on that I bought here on the board. Cleaned up both sides real well with WD-40, then alcohol. Dap gutter and flashing buytl caulk worked great for a reseal. It's gray, not black, but who's gonna see it!?! Slapped some stickers on. The Edelbrock is on the Ford, but I thought it funny to put on the soob. Hope to make some big progress here real soon, Eric
February 16, 200917 yr Dude, I have Edelbrock stickers on all my soobs.... I did have an Edelbrock air cleaner on the Beast for a while, but it wont fit on the Weber cuz I dont have the round filter adaptor... Oh, I learned the hard way that you really want to take the sway bar completely off otherwise it will dangle and get in the way of your steering stuff, and still hinder your flex a bit. I got lazy though and just cut the ends off right by the mounts with a 6" cutoff wheel on a grinder -Bill
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now