I did search 1st, but no joy, new to me SVX:banana: 92 170k, check engine light comes on goes off, starts good drives good. How to pull codes for CEL? Done it on 90 legacy but this SVX is blinding me with it beauty and awe:eek:..........thanks all,G

probably knock sensor, this car has 2 of them.

 

but i dunno

I did search 1st, but no joy, new to me SVX:banana: 92 170k, check engine light comes on goes off, starts good drives good. How to pull codes for CEL? Done it on 90 legacy but this SVX is blinding me with it beauty and awe:eek:..........thanks all,G

 

Its OBD1, so it should be easy to pull the codes with a reader.

If you want better/more info, go to http://www.subaru-svx.net/forum/forumdisplay.php?s=&daysprune=30&f=2

If the light comes on when you first go to start the car, but then goes off once running, this is normal.

oops my bad, heres the deal, turn on key all lights lite, start engine all lites except CEL go off, let warm up for awhile CEL goes off, drive little or just let run in driveway CEL back on, goes off good, comes on bad. and today it stalled a couple o times in the driveway,and i found the front knock sensor with a beautiful crack, that will be fun to change correct? MY question also is are there dangle connectors under the dash to check the codes. Thanks for the info so far, really do appreciate the help

O K found the info, for other SVX'ers lots of info here,The subaru svx world network.............Thanks to all, G