zyewdall Posted January 23, 2006 Share Posted January 23, 2006 So, I put the complete exhaust system (headers all the way back) from a loyale on my friends '87 GL a few months back. Apparently, it hangs a little differently, because the pipe coming out of the back of the muffler was pointed up a little too high, and the hot exhaust coming out melted a hole all the way through the plastic bumper. I welded a downturned tip on there yesterday, but I just thought it was funny when she asked me if I knew why the bumper was melting.... thought I'd share it. Sorry, no picture. Quote Link to comment Share on other sites More sharing options...
NoahDL88 Posted January 23, 2006 Share Posted January 23, 2006 That happens to most EA-82's even with the stock muffler, at least the ones i've seen. Quote Link to comment Share on other sites More sharing options...
WoodsWagon Posted January 24, 2006 Share Posted January 24, 2006 I believe it was corky that had an rx with the bumper all sagged down on that side from the heat. Quote Link to comment Share on other sites More sharing options...
Len Dawg Posted September 12, 2017 Share Posted September 12, 2017 I've noticed every loyale has a melted rear bumper, mine has one lol! But for the rare far and few in between I've seen a couple and I mean a couple that do not lol! Quote Link to comment Share on other sites More sharing options...
DaveT Posted September 13, 2017 Share Posted September 13, 2017 I only had one do that, forgot what the cause of the muffler / tail pipe being out of position was, but it was due to something not correct about the end / angle of the tail pipe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.