JonOfScio Posted November 2, 2003 Share Posted November 2, 2003 I've got nothing left on this beast that amounts to anything emissions except for the cats. The air injection system is completely taken off the heads. the heads are both driver's side heads, so the passenger one doesn't even have the spot for the EGR tube, then it's plugged on the manifold and the diaphraghm is closed and not active. disty has one line to the manifold, and my brake booster too. new clutch stuff... pad, pressure plate, TO bearing, ect. fuel system is still set up with send and return... oil pressure and temp sensor are the only things from my dash hooked up. (NO ECU!) can't wait until this Weberized de-emissionsified engine is back in and tearing up the neighborhood. Quote Link to comment Share on other sites More sharing options...
AKIRA Posted November 3, 2003 Share Posted November 3, 2003 Congratulations! Quote Link to comment Share on other sites More sharing options...
TomRhere Posted November 3, 2003 Share Posted November 3, 2003 Yanked all of that crap out when I did the Weber conversion. Don't you just love how it cleans up the engine bay? Can actually see most all of the engine now. I be happy!!! Quote Link to comment Share on other sites More sharing options...
Setright Posted November 3, 2003 Share Posted November 3, 2003 I hope you haven't disabled the PCV system. Quote Link to comment Share on other sites More sharing options...
JonOfScio Posted November 3, 2003 Author Share Posted November 3, 2003 I've got two PCV breathers with 5/8" outlets (inside it's got a foam material, and a screen mesh... catches the oil) passenger side will have another breather on it (for air) and the driver's side will go right to the PCV valve. Quote Link to comment Share on other sites More sharing options...
trooperjeep Posted November 3, 2003 Share Posted November 3, 2003 The 2nd cat-converter is "missing" on my 92 Loyale and has been replaced with a straight pipe (must have been the previous owner) but I was wondering if that will effect performance (good/bad) and back pressure. :-\ T.J. Quote Link to comment Share on other sites More sharing options...
JonOfScio Posted November 3, 2003 Author Share Posted November 3, 2003 now, I hope your talking about an NA car. Turbo cars don't want any backpressure, because the turbo makes it's own, and anything after that doesn't let it flow as well. But for NA cars, some cars are designed for maximum performance with good exhausts, and the cat is part of the backpressure for the engine... but for our subies, as long as you don't run HUGE exhaust without cats, it should be alright that you don't have the second one. Taking the second one out should give you a bit more performance. Not a whole lot, from what I hear, but I haven't played around with that yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.